Commercial Mechanical Contractor in Lacey, WA
Elite Services & Trusting Partnerships
Elite Mechanical Services is the South Sound’s trusted commercial mechanical contractor — licensed, union, and locally based in Lacey, WA. We serve facility managers, building owners, property managers, and institutional decision-makers from Tacoma and Puyallup south through Olympia, Tumwater, and Lacey, and continuing down the I-5 corridor to Centralia, Chehalis, Longview, and Kelso — with additional coverage across Shelton, Aberdeen, Hoquiam, and communities throughout Western Washington.
Our services span commercial HVAC, boilers, building automation, plumbing, refrigeration, new construction, tenant improvement work, and preventative maintenance.
When your building systems need attention, you need a commercial mechanical contractor who shows up with the right credentials and the right people.
Elite’s union-trained technicians are EPA-certified, Tridium Niagara licensed, and has one of the few Seattle Grade III Boiler Supervisor licenses in the area. Technicians are also factory trained for equipment brands including Mitsubishi, Samsung, LG, Daikin, Trane, Aaon, Carrier, Multistack, Raypack, Taco, Laars, Bell & Gossett, Armstrong, Aerco, Thermal Hydronics, CleaverBrooks, Intellihot, and Lochinvar. Elite holds the Mitsubishi Diamond Contractor status. We’re also a certified MWBE, DBE, SBE and PWSBE contractor — fully qualified for public-sector, institutional, and tribal project work.
Our Commercial Mechanical Services in the South Sound
Deferred maintenance doesn’t save money — it moves costs forward with interest. Equipment that isn’t regularly inspected, cleaned, and tested fails at the worst possible time, turning a routine service visit into an emergency repair that’s far more expensive and disruptive.
Elite Mechanical Services provides custom commercial preventative maintenance programs for HVAC systems, boilers, chillers, plumbing infrastructure, building automation systems, and commercial refrigeration equipment. We build schedules around your actual equipment inventory — not a generic checklist. Our union-trained technicians document every visit, flag developing issues early, and provide service records you can use for compliance, warranty, and capital planning. We serve commercial facilities across the South Sound and Southwest Washington, from Tacoma and Lakewood south through Olympia, Lacey, and Tumwater, and continuing down the I-5 corridor to Centralia, Chehalis, Longview, and Kelso. For emergency or urgent mechanical issues, Elite also responds to unscheduled service calls across our full coverage area.
An outdated or poorly integrated building automation system means higher energy costs, slower fault detection, and more manual intervention from your facilities team. A properly configured BAS gives you real-time visibility, automated fault alerts, and centralized control — all from a single interface.
Elite Mechanical Services provides BAS installation, integration, programming, and service for facilities throughout the South Sound and Southwest Washington. Our technicians are trained on Tridium Niagara, JCI Facility Explorer, and ABB Cylon BACnet platforms. We work with both pneumatic and digital controls and have the experience to integrate legacy systems with modern digital infrastructure. Our work covers new construction and retrofit applications — from multi-building campuses in Tacoma and University Place to institutional facilities in Shelton, Yelm, and Rainier.
HVAC failure in a building disrupts operations, puts occupants at risk, and depending on the facility, can create regulatory exposure. You need a mechanical contractor who responds quickly, diagnoses accurately, and repairs correctly — not one who works through a trial-and-error process on your dime.
Elite Mechanical Services provides commercial HVAC services across a wide stretch of Western Washington — from Puyallup and DuPont in the north, through Lacey, Olympia, and Tumwater, and south to Centralia, Chehalis, Longview, and Kelso.
We service boilers, chillers, rooftop units, split systems, VRF/VRV systems, and energy recovery ventilators. As a Mitsubishi Diamond Contractor, we hold factory-endorsed expertise in Mitsubishi’s commercial product line.
The wrong equipment selection or a poor installation creates years of efficiency losses, comfort complaints, and warranty headaches. HVAC installation requires a contractor with the right manufacturer relationships and the technical depth to match the system to the facility — not just to the budget.
Elite Mechanical Services handles commercial HVAC installation for new construction, retrofit, and replacement projects throughout the region — from Tacoma, Lakewood, and University Place in the north, through the core South Sound markets of Lacey, Olympia, and Tumwater, and into communities like Shelton, Tenino, Toledo, and Winlock to the south and west. We install rooftop units, split systems, VRF/VRV multi-zone systems, and energy recovery ventilators. As a Mitsubishi Diamond Contractor, every installation is load-calculated, permitted, inspected, and commissioned.
When commercial air conditioning underperforms, the impact moves fast — occupant complaints, productivity loss, and in healthcare or lab environments, genuine operational risk. Facility managers need a contractor who can work around their schedule and resolve problems without a second visit.
Elite Mechanical Services provides commercial AC inspection, diagnostics, repair, refrigerant service, and seasonal maintenance programs for facilities across the South Sound. We work on rooftop units, split systems, mini-splits, VRF/VRV systems, and chilled water air handlers. Our EPA-certified technicians meet all refrigerant handling requirements. As a Mitsubishi Diamond Contractor, we have factory-level expertise on Mitsubishi’s cooling line. We serve facilities from Aberdeen and Hoquiam on the coast through Shelton, Olympia, Lacey, Tumwater, Yelm, and DuPont.
Commercial boiler installation requires specific credentials — not just a general HVAC background. In Washington state, boiler work is regulated, and building owners need to confirm that a contractor’s licensing is in order before any work begins. Hiring without verifying that can create inspection failures and liability exposure.
Elite Mechanical Services holds a Seattle Grade III Boiler Supervisor credential and Boiler License #LIC-BO-1670. We install hot water boilers, steam boilers, and high-efficiency condensing systems, including Intellihot tankless units, for schools, hospitals, government facilities, and commercial properties throughout the region — from Tacoma and Puyallup south through Lacey, Olympia, and Tumwater and into Centralia, Chehalis, and Lewis County. All work is performed under GC License ELITEMS796R2, with permits, inspections, and commissioning included.
In Washington state, boilers are subject to inspection requirements. Facility managers who let maintenance lapse risk not just system failure, but code compliance issues. A structured maintenance program is one of the clearest cases where a consistent, predictable cost prevents large, unpredictable ones.
Elite Mechanical Services provides commercial boiler maintenance backed by a Seattle Grade III Boiler Supervisor credential and Boiler License #LIC-BO-1670. Our scope covers combustion analysis, heat exchanger inspection, controls calibration, safety relief valve testing, flue inspection, and burner service — with full documentation for compliance purposes. We serve facilities from Rainier and Tenino to Longview and Kelso, with strong coverage across the Olympia, Lacey, and Tumwater core. Annual, semi-annual, and custom maintenance schedules are available.
Plumbing in institutional and multi-story facilities is a different category from residential work. Pressure systems, backflow prevention requirements, water heater configurations, and code compliance obligations are all significantly more complex. Facility managers need a licensed contractor who treats every job as a permanent fix — not a patch.
Elite Mechanical Services holds Plumbing License #ELITEMS761BC and handles new construction rough-in, tenant improvement plumbing, fixture upgrades, backflow preventer installation and annual testing, Intellihot tankless water heater installation, and commercial pipe repair across copper, PEX, and schedule 40/80 PVC. We serve the full I-5 corridor from Tacoma through Lacey, Olympia, and Tumwater and south to Chehalis, Centralia, Winlock, and Toledo, plus coastal communities including Aberdeen and Hoquiam.
In restaurants, hospitals, and multi-story buildings, a drain backup doesn’t stay a nuisance for long — it becomes a health code issue, a facility closure, or a water damage event. Scheduled drain maintenance costs a fraction of what emergency response costs after a full blockage.
Elite Mechanical Services provides commercial drain cleaning and hydro jetting throughout Western Washington. Hydro jetting clears the full interior diameter of the pipe — grease accumulation, mineral scale, root intrusion, and debris — restoring flow closer to original capacity. We service grease trap lines, floor drains, kitchen drain lines, main laterals, and multi-story stack cleanouts in commercial kitchens, healthcare facilities, schools, offices, and industrial properties. Our service area includes Tacoma, Lakewood, Puyallup, DuPont, Lacey, Olympia, Tumwater, Shelton, Yelm, Centralia, and Longview.
When refrigeration fails, product loss is immediate. Walk-in coolers, reach-in units, display cases, and freezer systems are mission-critical assets for restaurants, food retail, pharmaceutical storage, and food service operations. You need a certified refrigeration contractor who can respond fast and resolve it correctly.
Elite Mechanical Services provides commercial refrigeration installation, diagnostics, repair, refrigerant service, and preventative maintenance. Our technicians hold EPA Section 608 certification — legally required for refrigerant handling on commercial equipment. We service self-contained units, remote condensing systems, walk-in cooler and freezer systems, and commercial ice machines. We cover a broad service footprint including Aberdeen, Hoquiam, Shelton, Olympia, Lacey, Tumwater, Yelm, Rainier, Centralia, Chehalis, Longview, and Kelso.
Poor ventilation in a commercial facility isn’t just a comfort issue — it’s an air quality, code compliance, and occupant health issue. Inadequate airflow leads to elevated CO2 levels, moisture buildup, and degraded indoor air quality that affects productivity, increases sick days, and in healthcare or food service environments, can create regulatory problems.
Elite Mechanical Services provides ventilation installation, assessment, and maintenance for facilities across the South Sound and I-5 corridor. We install and service exhaust systems, supply air systems, energy recovery ventilators (ERVs), heat recovery ventilators (HRVs), makeup air units, and kitchen hood ventilation systems. Our technicians assess airflow balance, identify deficiencies, and bring systems into proper operating condition. We serve schools, hospitals, commercial kitchens, warehouses, office buildings, and industrial facilities from Tacoma and Lakewood south through Olympia, Lacey, and Tumwater to Centralia, Chehalis, and beyond.
Chiller systems and cooling towers are among the most capital-intensive mechanical assets in a commercial or institutional facility. When they underperform, the impact cascades across every space they serve. Maintaining and servicing these systems requires a contractor with hands-on experience across chiller types and cooling tower configurations — not a generalist who handles them occasionally.
Elite Mechanical Services provides chiller installation, maintenance, and repair along with cooling tower service for commercial, institutional, and industrial facilities throughout Western Washington. Our technicians are experienced with air-cooled and water-cooled chiller systems, chiller-boiler integration, primary/secondary hydronic loop configurations, and cooling tower cleaning, inspection, and mechanical service. We work in hospitals, university buildings, government facilities, hotels, and large commercial campuses from Puyallup and University Place through Lacey, Olympia, and Tumwater and into Shelton, Centralia, and Longview.
One Contractor. Every System. The Whole Region
Elite Mechanical Services provides commercial mechanical contractor services across Western Washington…from Tacoma, Puyallup, and Lakewood in Pierce County in the north through Lacey, Olympia, and Tumwater in Thurston County, and south along the I-5 corridor through Lewis County to Centralia, Chehalis, Longview, and Kelso.
We also serve Aberdeen, Hoquiam, Shelton, and communities throughout the South Sound. Our licensed, union-trained technicians are available for scheduled projects, service agreements, and urgent needs — wherever your facility is.
Why Facility Managers and Building Owners Choose Elite
Elite Mechanical Services brings a credential set that most commercial mechanical contractors in the South Sound can't match.
We hold a licensed general contractor credential, a licensed electrical contractor credential, and a licensed plumbing contractor credential — which means we can manage multi-trade mechanical projects under a single contract, with a single point of accountability. We’re also a union contractor, a Mitsubishi Diamond Contractor, an Intellihot IntelliPRO contractor, and hold specialized credentials including a Seattle Grade III Boiler Supervisor license and EPA Section 608 certification for refrigeration work.
We’re also certified as a Minority Business Enterprise, Woman Business Enterprise, Disadvantaged Business Enterprise, and Public Works Small Business Enterprise (MWBE Cert #M1F0027854 | DBE Cert #D1F0027854 | PWSBE Cert #P000027854). Those certifications matter for public agencies, school districts, tribal organizations, and any institution with supplier diversity requirements in their procurement process.
Founded in Lacey in 2021, Elite is owner-led, relationship-driven, and commercially focused. We don’t do residential work. Every project we take on is for a commercial, institutional, or public-sector facility — which means our team is calibrated to the needs of building professionals.
Custom service agreement programs are available for facilities that need structured maintenance coverage across multiple building systems.
Commercial Mechanical Contractor | Lacey, WA | Founded 2021
ABOUT ELITE MECHANICAL SERVICES
Elite Mechanical Services is a licensed, union, minority-owned, women owned, commercial mechanical contractor built to serve the South Sound's most demanding facilities.
Extensive credentials. A single point of accountability.
Why Lacey and South Sound Facilities Choose Elite
Founded in Lacey in 2021, Elite is owner-led, relationship-driven, and customer focused commercial mechanical contractor . We don’t do residential work. Every project we take on is for a commercial, institutional, or public-sector facility — which means our entire team is calibrated to the standards, schedules, and accountability that building professionals expect.
We’re also certified as a Minority Business Enterprise, Woman Business Enterprise, Disadvantaged Business Enterprise, and Public Works Small Business Enterprise — credentials that matter for any institution with supplier diversity requirements.
Union-Trained Technicians
Union Commercial Mechanical Contractor — certified, union-trained technicians on every project, every time.
Triple-Licensed Contractor
GC License: ELITEMS796R2
Electrical: ELITEMS787CH
Plumbing: ELITEMS761BC
Boiler Supervisor Credentialed
Seattle Grade III Boiler Supervisor Boiler License #LIC-BO-1670
Factory-Certified Equipment
Mitsubishi Diamond Contractor Intellihot IntelliPRO Contractor
BAS Controls Capable
Tridium Niagara
JCI Facility Explorer
ABB Cylon BACnet certified
EPA-Certified Technicians
EPA Section 608 certified technicians — refrigeration and HVAC
Supplier Diversity Certified
MWBE / DBE / PWSBE certified — qualified for public-sector and tribal project work
Fire & Life Safety Credentialed
Fire Smoke Damper Supervisor credential
5.0
Our average customer Google rating is 5.0
What Our Customers Say About Our Commercial Mechanical Contractor Services
